194002323 - 2130A27 DELIVERY AND RETURN DUPLEX PIPING OF AUTOMATIC GEARBOX OIL TO COOLING RADIATOR - R R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Undo the nut (1a) and disconnect the flange for the duplex automatic transmission supply and return pipes to the cooling radiator (1b), automatic transmission side.

Collect the automatic transmission fluid that comes out in a suitable container.

1. Lower protection collars (1a) and withdraw retaining clips (1b).2. Remove the automatic transmission fluid duplex supply and return pipes to the heating radiator from the thermostat valve. - Remove the automatic transmission fluid duplex supply and return pipes to the heating radiator. Refitting ( Removing ) - Place the automatic transmission fluid duplex supply and return pipes to the heating radiator in their housings.- Connect the pipes to the automatic transmission fluid cooling circuit thermostat valve and secure with the clips.

Lower the protection collars to fit the retaining clips.

- Connect the flange for the automatic transmission fluid duplex supply and return pipes to the heating radiator, automatic gearbox side and secure it by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Automatic transmission fluid radiator supply and return pipes	Nut	-	(automatic gearbox side) 0.7	2.4 JTD 20v CAE

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R    Op. 0010T45 AUTOMATIC TRANSMISSION FLUID CHECK LEVEL AND TOP UP IF NECESSARY    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Remove the vehicle from the lift.