194002552 - 2710A31 INTERMEDIATE DRIVESHAFT - R R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R    Op. 2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R- Position the front driveshaft in a vice fitted with protective jaws.

Two mechanics are needed for this operation.

- Remove the bands securing the protective boot using a suitable tool.- Turn the boot upsidedown to uncover the three-lobe joint.- Using a suitable drift and hammer, disconnect the intermediate driveshaft from the front driveshaft. Refitting ( Removing ) - Fill the joint and the boot with the specified grease.

Component	Type	Description	Classification	Qty.	Validity
FRONT DRIVESHAFT DIFFERENTIAL SIDE CONSTANT VELOCITY JOINT	Grease (g)	TUTELA MRM ZERO	NLGI 0	140 ± 10	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

- Using a suitable drift, fit the intermediate driveshaft on the front driveshaft.- Place the boot back in its housing.- Fit two new bands securing the boot using a suitable tool.- Remove the front driveshaft from the vice fitted with protective jaws.    Op. 2710A14 RIGHT HAND DRIVE SHAFT WITH JOINTS - R+R    Op. 4450B04 RIGHT FRONT WHEEL - R.R- Remove the vehicle from the lift.