194002914 - Y074 P2015 - FLOW BYPASS VALVE (FEEDBACK)

The diagnostic equipment signals: Error P2015 (flow valve (feedback)).

This error is detected if the control unit recognizes a malfunction in the circuit by means of an internal evaluation logic or if there is interference with the signal for the sensor at Pin 45 of the electronic control module.

1	Flow modifying solenoid valve check	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the flow modifying solenoid valve is working properly by carrying out the    See Test 1060EB CHECK ON OPERATION OF FLOW SOLENOID VALVE	End of diagnosis