1084C34 ENGINE OIL COOLING RADIATOR - R + R - Fiat - CROMA - eLearn

194003997 - 1084C34 ENGINE OIL COOLING RADIATOR - R + R

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-). Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R Op. 7055A43 CENTRE FRONT GRILLE - R.R. Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. Op. 7210E10 R.R. FRONT BUMPER Op. 1084C40 AIR DUCT FOR ENGINE OIL COOLING RADIATOR - R.R.1. Unscrew the bolts (1a) and disconnect the engine oil supply and return pipes to the cooling radiator (1b), radiator side.

Collect the engine oil that comes out in a suitable container.

1. Undo the nuts (1a) and remove the engine oil cooling radiator (1b).

Refitting ( Removing

) - Fit the engine oil cooling radiator in place and secure it using the nuts.- Connect the engine oil supply and return pipes to the coolant radiator, radiator side, and tighten the bolts to the recommended torque.

Replace the O ring seals on the connectors for the engine oil supply and return pipes to the cooling radiator.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil radiator supply and return pipes	Connector	M22	(radiator side) 4.0 - 4.5	2.4 JTD 20v

Op. 1084C40 AIR DUCT FOR ENGINE OIL COOLING RADIATOR - R.R. Op. 7210E10 R.R. FRONT BUMPER Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 7055A43 CENTRE FRONT GRILLE - R.R. Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R- Connect the negative battery terminal. Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY- Remove the vehicle from the lift.