1084C36 ENGINE OIL COOLING RADIATOR SUPPORT BRACKET - R + R - Fiat - CROMA - eLearn

194003998 - 1084C36 ENGINE OIL COOLING RADIATOR SUPPORT BRACKET - R + R

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-). Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R Op. 7055A43 CENTRE FRONT GRILLE - R.R. Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. Op. 7210E10 R.R. FRONT BUMPER1. Undo the nuts securing the engine oil cooling radiator to the mounting bracket.- Move the engine oil cooling radiator to the side without disconnecting the pipes.

1. Undo the upper bolts securing the engine oil cooling radiator mounting bracket to the bodyshell.2. Undo the lower bolt securing the engine oil cooling radiator mounting bracket to the bodyshell.

This bolt also secures the front suspension frame to the bodyshell.

3. Remove the engine oil cooling radiator mounting bracket.

Refitting ( Removing

) - Place the engine oil cooling radiator mounting in its housing.- Tighten the lower bolt securing the engine oil cooling radiator mounting bracket to the bodyshell to the recommended torque.

This bolt also secures the front suspension frame to the bodyshell.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension frame	Front-rear bolts (to replace)	M12	(bodyshell side) 9.0 - 11.0 + 90°

- Tighten the upper bolts securing the engine oil cooling radiator mounting bracket to the bodyshell.- Place the engine oil cooling radiator back in its housing and secure it to the mounting bracket using the nuts. Op. 7210E10 R.R. FRONT BUMPER Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 7055A43 CENTRE FRONT GRILLE - R.R. Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R- Connect the negative battery terminal.- Remove the vehicle from the lift.