194004013 - 2130A36 <x>AUTOMATIC TRANSMISSION FLUID COOLING CIRCUIT THERMOSTAT VALVE - R&R</x>

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Lower the protective collars (1a) and release the retaining clips (1b).2. Disconnect the pipes from the thermostatic valve for the automatic transmission fluid cooling circuit.
Collect the automatic transmission fluid that comes out in a suitable container.
3. Undo the bolt fixing the automatic transmission fluid cooling circuit thermostatic valve.4. Loosen the bands (4a) using the tool and disconnect the pipes (4b) from the automatic transmission fluid cooling circuit thermostatic valve.
ToolDescriptionFunctionValidity
1881138000CaliperRemoving bands2.4 JTD 20V
5. Keep the automatic transmission fluid cooling circuit thermostatic valve.
Refitting ( Removing ) - Plac the automatic transmission fluid cooling circuit thermostatic valve in its housing and secure it using the bolt.- Connect the pipes to the automatic transmission fluid cooling circuit thermostatic valve and tighten the bands.- Connect the pipes to the automatic transmission fluid cooling circuit thermostatic valve and fasten them using the retaining clips.
Lower the protective collars in order to fit the retaining clips.
    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R    Op. 0010T45 AUTOMATIC TRANSMISSION FLUID CHECK LEVEL AND TOP UP IF NECESSARY    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Remove the vehicle from the lift.