194000349 - 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R.R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery    See A001 BATTERY
1. Disconnect the electrical connection from the accelerator pedal with built in potentiometer.
DescriptionConnector
1Accelerator pedal potentiometer    See K055 ACCELERATOR PEDAL POTENTIOMETER
2. Undo the nuts (2a) and remove the accelerator pedal with built in potentiometer (2b).
Refitting ( Removing ) - Place the accelerator pedal with built in potentiometer back in its housing and secure it using the nuts.- Connect the electrical connection to the accelerator pedal with built in potentiometer.- Connect the negative battery terminal.