194000811 - 5580C52 WINDOW BAG MODULE (ONE) LH OR RH - R.R WITH INTERFERING PARTS REMOVED

Before removing and refitting the Window Bag module the following preliminary operations must be carried out.

- Turn the ignition key to the OFF position and extract it.- Disconnect the negative and positive battery terminals and insulate them.- Wait for 10 minutes before continuing.

	Description	Connector
	BATTERY	See A001 BATTERY

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM

Removing ( Refitting ) 1. Working in the rear of the vehicle, disconnect electrical connection (1a) and unscrew the window bag module gas generator bolts (1b).

	Description	Connector
1a	DRIVER SIDE WINDOW BAG	See Q040 DRIVER'S HEAD BAG

	Description	Connector
1a	DRIVER SIDE WINDOW BAG	See Q040 DRIVER'S HEAD BAG

1. Working in the front of the vehicle, unscrew bolt (1a) and release the window bag module link (1b) from retainer (1c). 1. Undo the six bolts (1a) retaining Window Bag module (1b). 1. Remove the window bag module from the vehicle. Refitting ( Removing ) Observe the following precautions:

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Before sticking it it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2003 for 2017).

- Position the window bag module in its seat, tighten the six bolts along the upper perimeter of the side panel and tighten to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
HEAD BAG TO BODYSHELL	Bolt	M6	0,8 ÷ 1,2

- Working in the front of the vehicle, secure the window bag module link in the retainer and tighten the bolt.

Component	Fastening	dia	Value (daNm)	Validity
HEAD BAG RETAINING BAND TO BODYSHELL	Bolt	M6	0,64 ÷ 0,96

- Working at the rear of the vehicle, position the window bag module gas generator, screw in the bolts and tighten to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
HEAD BAG GAS GENERATOR TO BODYSHELL	Bolt	M6	0,8 ÷ 1,2

- Connect the electrical connection.    See Q040 DRIVER'S HEAD BAG

	Description	Connector
	DRIVER SIDE WINDOW BAG	See Q040 DRIVER'S HEAD BAG

	Description	Connector
	PASSENGER SIDE WINDOW BAG	See Q041 PASSENGER HEAD BAG

- Connect the battery terminals.

	Description	Connector
	BATTERY	See A001 BATTERY