194000832 - 7005A08 INTERIOR SUPPORT FRAME FOR ONE SIDE DOOR - R.R. WITH DOOR PANEL REMOVED
Removing
(
Refitting
)
 | Lower the window until the retaining clip is accessible through the inspection opening. |
1. Release glass (1a) from clips (1b) accessible through inspection holes (1c), raise to the end of its travel and support as appropriate.
1. Disconnect the electrical connection from the door node mirror.
1. Turn the ring nut (1a) and disconnect the front side door coupling (1b).2. Prise upthe front side door bulkhead couplings and push as far as possible into the door.
1. Unscrew the bolts and move the support frame with care.- Disconnect the electrical connection for the door lock actuator.
2. Release seal (2b) for passage of connection link (2c) and push inside, then remove support frame (2a).
Refitting
(
Removing
)
- Check that the frame is undamaged and ensure the perimeter seal is undamaged and clean. Also check the contact surface on the door frame is clean.
- Bring the support frame up to the door and fit the front side door junction bulkhead couplings in their seat.- Insert the connection link in the support frame, fit the passage seal and connect the door lock actuator electrical connection.
- Position the support frame on the door and tighten the fixing bolts.- Connect the mirror electrical connection to the door node.- Connect the front side door junction and turn the lockring.
