1. Disconnect the gear engagement cable from the gear selector and from the bracket.2. Release the seal for the bulkhead passage (2a) and remove the gear engagement cable (2b).
Refitting
(
Removing
)
- Place the gear engagement cable back in its housing and position the sael on the bulkhead passage.- Connect the gear engagement cable to the automatic gearbox manual control support and lever.- Place the selector lever in position "D".- Place the gear selector lever in the fully forwards position towards the headlamps.- Place the selector lever three positions backwards (anti-clockwise rotation).1. With the adjustment device (1a) in the open position, connect the gear engagement cable (1b) to the gear selector and to the bracket.- Lock the adjustment device.