194002513 - 0010T62 BRAKE AND/OR CLUTCH FLUID - REPLACE FLUID INCLUDES WASHING PIPES AND BLEEDING AIR

The brake fluid replacement process is described below.

- Position the vehicle on a lift.- Draw off the brake-clutch fluid from the reservoir using a suitable syringe.- Remove the protective cap from the bleed valve on one brake caliper.- Connect the recovery device (pipe and reservoir) to the bleed valve on the brake calliper.- Open the bleed valve on the brake caliper.- Pump the brake pedal until all the fluid emerges.- Repeat the operations described above for the remaining brake calipers.- Connect the tool to the brake/clutch fluid reservoir.

Tool	Description	Function	Validity
1806524000	Brake-clutch bleeding equipment	Brake-clutch hydraulic systems bleeding

- Slowly open the device reservoir cock and refill the brake/clutch systems with the recommended fluid.

Component	Type	Description	Classification	Qty.	Validity
BRAKE-CLUTCH HYDRAULIC SYSTEM	Synthetic fluid	TUTELA TOP 4FMVSS n° 116	DOT 4 - ISO 4925 - SAE J-1704 - CUNA NC 956-01	0.750 kg

- Wait for all the air in the hydraulic system to emerge completely.- Close the bleed valves on the brake callipers and fit protective plugs.- Remove the fluid recovery devices.- Remove the equipment used.- Check the efficiency of the braking system.- Remove the vehicle from the lift.