194000216 - 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY

Note that the gearbox fluid level under factory specifications is always below the inspection hole, up to approximately 20 mm. The gearbox fluid level only needs checking in the event of lost external seal and repairs to the gearbox. Top up if necessary.
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Undo the transmission fluid level control plug and check that the fluid reaches the bottom edge of the inspection opening.
1. If necessary, disconnect the electrical connection (1a), remove the reversing lights switch (1b) and then top up with the recommended fluid.
DescriptionConnector
1aReversing lights switch    See I020 REVERSING LIGHTS SWITCH
ComponentTypeDescriptionClassificationQty.Validity
MANUAL GEARBOXOilTUTELA CAR MATRYXSAE 75W-85 - API GL-41.6 litres1.8
The quantity of oil after a repair is around 1.6 litres.
- Fit the reversing lights switch tightening it to the recommended torque and connect the electrical connection.
ComponentFasteningdia  Value (daNm)Validity
Reversing light switch--2.01.8
- Tighten the transmission fluid level check plug to the specified torque.
ComponentFasteningdia  Value (daNm)Validity
Transmission fluid level check plug-M180.3 ÷ 0.5 + 180°1.8
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.