1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE - Fiat - CROMA - eLearn

194000236 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

) 1. Disconnect the electrical connection for the air flow meter.

	Description	Connector
1	Air flow meter	See K041 AIR FLOW METER

2. Loosen the band (2a) securing the air inlet hose to the throttle casing (2b) and then remove the air filter (2c) complete with flow meter and hose (2b).

- Position an arm lift underneath the engine.1. Undo the bolts (1a), (1b) and the nut (1c) and remove the flexible mounting for the timing side power unit front support (1d).

Refitting ( Removing

) - Place the power unit front support flexible mounting in its housing and secure it tightening the bolts and the nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Bolt	M10	(rigid support side) 5.0 - 6.0	1.82.21.9 JTD 16v1.9 JTD 8v

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Bolt	M10	(bodyshell side) 5.0 - 6.0

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support flexible mounting	Nut	M10	(bodyshell side) 5.0 - 6.0

- Place the air filter complete with flow meter and throttle body air inlet hose in its housing and secure it using the band.- Connect the electrical connection for the air flow meter.