194000246 - 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET

Removing ( Refitting )     Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD - R+R    Op. 5510C14 IGNITION COIL/S - R.R.1. Lift up the retaining clip and disconnect the engine oil vapour pipe from the tappet cover.2. Disconnect the ducts for the engine wiring from the tappet cover.3. Undo the fixing bolts and remove the tappet cover from the cylinder head. Refitting ( Removing ) - Place the tappet cover in position and secure it to the cylinder head tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Tappet cover	Bolt	-	0.8	1.8

- Connect the ducts for the engine wiring to the tappet cover.- Connect the engine oil vapour pipe to the tappet cover using the retaining clip.    Op. 5510C14 IGNITION COIL/S - R.R.    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD - R+R