194000258 - 1020D38 FLYWHEEL SIDE OIL SEAL - REPLACE
Removing
(
Refitting
)
Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1080B95 REAR LAMBDA SENSOR TO CATALYTIC CONVERTER - R.R Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R Op. 4410D10 FRONT SUSPENSION FRAME - R+R Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5520B10 STARTER MOTOR - R+R Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R Op. 1810A20 CLUTCH - R + R Op. 1024B22 ENGINE FLYWHEEL - R.R WITH CLUTCH REMOVED FOR VERSIONS WITH MANUAL GEARBOX1. Remove the phonic wheel for the engine rpm sensor.2. Undo the bolt (2a) and remove the engine rpm sensor (2b).3. Release the engine rpm sensor support ring and remove it.
 | Take care not to damage the oil seal seal during its removal. |
Refitting
(
Removing
)
1. Place a new flywheel side oil seal (1a) in the housing using the tool (1b).| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860843000 | Fitting tool | Fitting crankshaft rear oil seal | 1.8 |
