194000595 - 5010D72 AIR QUALITY SENSOR - R.R. FOLLOWING ELECTRICAL CIRCUIT CHECK
Removing
(
Refitting
)
Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R Op. 7210E22 R.R. WINDSCREEN BASE TRIM1. Disconnect the electrical connection (1a) from the air quality sensor (1b).2. Working on the retaining tabs (2a) remove the air quality sensor (2b) from the windscreen base trim.
| Description | Connector | |
|---|---|---|
| 1a | EXHAUST GAS SENSOR | See K064 EXHAUST GAS PRESENCE SENSOR |
Refitting
(
Removing
)
- Check that the air quality sensor is not damaged.- Fit it in the housing until the tabs are fully attached.- Connect the connector to the air quality sensor.| Description | Connector | |
|---|---|---|
| EXHAUST GAS SENSOR | See K064 EXHAUST GAS PRESENCE SENSOR |