194001305 - E2012 HIGH BEAMS - DESCRIPTION
The vehicle is equipped with two high beams in the headlamps.The high beams are activated by operating the left steering wheel stalk:- when the low beams are on, by pulling the lever toward the steering wheel (2nd unstable position);- in flashing mode, irrespective of wheel position, by pulling the lever towards the steering wheel (1st unstable position);The high beam activation relay is controlled by the Body Computer The relay is excited by enablement signals received when the key is inserted into the ignition and turned ON (INT from the steering lock control unit) and a specific control signal from the steering wheel stalk unit.Activation/deactivation information is sent via the CAN network: in this way, the high beam warning light is activated on the control panel.for legal reasons, if the dusk sensor is activated, only the flasher can be operated and the main beams cannot be turned on permanently; the AUTO function must be switched off in order to activate these lights. |