194002481 - K050 MIL WARNING LIGHT ON (ENGINE DOES NOT START)

The engine control unit warning light stays on. The CODE warning light goes on and off. N.B.: If the CODE warning light goes off, this means that the communication between both control units has been successful.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic test equipment (Examiner or other instruments) to the tester input.Check for errors saved in the control unit.	Move on to Step 2	Error detected in the control unit	Proceed as instructed by the diagnostic tester
2	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis	Fault persists	Continue as instructed in the    See table B010 ENGINE DOES NOT START (UNDER ANY CIRCUMSTANCES)