194003011 - 1020D10 FRONT CRANKSHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED

Removing ( Refitting )     Op. 0010T20 ENGINE COOLANT - CHANGE    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 5530A10 ALTERNATOR - R+R    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY    Op. 1032C10 TIMING SYSTEM MOVING TENSIONER - R.R WITH TIMING BELT/CHAIN REMOVED    Op. 1032B46 TOOTHED DRIVE PULLEY - R + R1. Fit the tool (1a) complete with support mountings (1b), and connect it to the bracket on the engine using the rod (1c).
ToolDescriptionFunctionValidity
1820581000CrossmemberPower unit support1.82.2
ToolDescriptionFunctionValidity
1870650000Support blocksPower unit support1.82.2
- Remove the timing side rigid power unit support, refer to    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.1. Loosen the band and disconnect the water pump inlet hose.2. Undo the bolts (2a) and remove the crankshaft oil seal front cover (2b) complete with water pump and engine oil pump.- Remove the gasket.
Refitting ( Removing ) - Fit a new gasket on the crankshaft oil seal front cover.- Place the crankshaft front cover in its seat complete with water pump and engine oil pump and tighten the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Crankshaft oil seal front coverBolt-2.01.8
- Connect the inlet hose to the water pump and tighten the band.- Place the timing side rigid power unit support in position, refer to    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.- Remove the tools used for supporting the engine.    Op. 1032B46 TOOTHED DRIVE PULLEY - R + R    Op. 1032C10 TIMING SYSTEM MOVING TENSIONER - R.R WITH TIMING BELT/CHAIN REMOVED    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY    Op. 5530A10 ALTERNATOR - R+R    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY    Op. 0010T20 ENGINE COOLANT - CHANGE