194003023 - 1036C41 PHASE TRANSFORMER ON OVERHEAD CAMSHAFT (ONE) INTAKE EXHAUST ON CYLINDER HEAD - R.R.

Removing ( Refitting )     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT
The procedure for the inlet side phase transformer is described below, the one for the exhaust side is the same.
1. Undo the sealing plug complete with O-ring.2. Undo the bolt (2a) securing the phase transformer (2b).3. Remove the templates.
ToolDescriptionFunctionValidity
2000012100TemplateCamshaft timing1.8
- Remove the phase transformer (2b) from the camshaft.
Refitting ( Removing ) - Place the phase transformer on the camshaft.- Fit the timing templates on the phase transformers.
ToolDescriptionFunctionValidity
2000012100TemplateCamshaft timing1.8
Check that the timing references on the templates and the phase transformers are correctly aligned.
- Tighten the phase transformer retaining bolt to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Variable valve timing actuatorBolt (to be replaced)-6.5 + 120° + 15°1.8
- Tighten the sealing plug complete with new O-ring.    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.