194003040 - 1088D59 COOLANT SUPPLY PIPE TO THROTTLE BODY - R.R.

Removing ( Refitting )     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 0010T20 ENGINE COOLANT - CHANGE    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R1. Disconnect the rapid connector for the throttle body coolant supply pipe, thermostat side. 1. Loosen the band and disconnect the throttle body coolant supply pipe, throttle body side. - Remove the throttle body coolant supply pipe from the retaining clips on the modular chamber. Refitting ( Removing ) - Place the throttle body coolant supply pipe in position and secure it to the modular chamber using the retaining clips.- Connect the coolant supply pipe to the throttle body, throttle body side and tighten the band.- Connect the rapid connector for the throttle body coolant supply pipe, thermostat side.    Op. 1048A34 SLEEVE(S) FROM FLOW METER TO AIR SUPPLY CAPACITY CASE - R + R    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R    Op. 0010T20 ENGINE COOLANT - CHANGE    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.