194003048 - 5040A82 PIPE FROM COMPRESSOR TO CONDENSER AND EXPANSION VALVE FITTING R R
Removing
(
Refitting
)
- Follow the safety instructions- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal. Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R1. Unscrew the bolt (1a) securing the air conditioner pipe (1b) to the compressor and release it from the anchorage clamp (1c).
1. Undo the nut (1a) securing the pipe (1b) to the intermediate coupling.
1. Loosen the nut (1a) fixing the pipe (1b) to the condenser.
1. Remove the air conditioning pipe.
Refitting
(
Removing
)
 | Always replace the gaskets with new parts. |
- Position the air conditioner pipe in its seat on the compressor.1. Unscrew the bolt (1a) securing the air conditioner pipe (1b) to the compressor, tighten to the specified torque and secure anchorage clamp (1c).| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| AIR CONDITIONING PIPE ON COMPRESSOR | Bolt | | 1.6 ÷ 2.4 | 1.8 16v |
1. Position the pipe (1a) on the intermediate coupling and tighten the fixing nut (1b) to torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| AIR CONDITIONING PIPE TO INTERMEDIATE COUPLING | Nut | | 1.6 ÷ 2.4 | 1.8 16v |
1. Position the pipe (1a) on the condenser and tighten the fixing nut (1b) to torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| AIR CONDITIONING PIPE TO CONDENSER | Nut | | 1.6 ÷ 2.4 | 1.8 16v |
Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE- Connect the negative battery terminal.
