194000292 - 1040B32 FRONT FUEL DELIVERY LINE - R.R.

Removing ( Refitting ) 1. Undo the plug and fit the connector to discharge the fuel pressure.

Tool	Description	Function	Validity
2000002900	Breather connector	Fuel system pressure drainage	1.82.2

- Use a suitable container for collecting the fuel. 1. Disconnect the rapid connector for the front fuel pipe, manifold pipe side.2. Disconnect the front fuel pipe from the fastening clips in the engine compartment.     Op. 4450B04 RIGHT FRONT WHEEL - R.R1. Working from beneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b). 1. Unscrew the bolts and remove the rear pipe protection.2. Undo the bolts (2a) and remove the bracket (2b). 1. Unscrew the bolts (1a), loosen the bolt (1b) and turn the underbody reinforcement (1c) slowly. 1. Disconnect the rapid connector (1a) and remove the front fuel supply pipe (1b).

Releae the front fuel supply pipe working via the right front wheel arch.

Refitting ( Removing ) - Place the front fuel supply pipe in its housing and connect the rapid connector.- Place the underbody reinforcement in position and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Inner bolt (to replace)	M12	(bodyshell side) 8.1 - 9.9 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Outer bolt (to replace)	M10	(bodyshell side) 5.0 - 6.1 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Bolt (to be replaced)	M12	(front suspension frame side) 9.0 - 11.0 + 90°

- Fit the bracket in its housing and secure it using the bolts.- Place the rear pipe protection in its housing and secure it using the bolts.- Place the front pipe protection in its housing and secure it using the bolts.- Connect the front fuel pipe in the engine compartment using the retaining clips.- Connect the rapid connector for the front fuel pipe, manifold pipe side.