194000321 - 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

Removing ( Refitting )

The injection-ignition system control unit is a component that is sensitive to electrostatic interference. Do not touch the injection-ignition system control unit once the engine is started unless the static electricity has been discharged first by touching the bodyshell.

1. Disconnect the electrical connections for the injection/ignition system control unit.

	Description	Connector
1	Engine management control unit	See M010 ENGINE MANAGEMENT CONTROL UNIT

2. Undo the bolt and release the earth lead from the control unit.3. Undo the bolts (3a) and remove the injection/ignition system control unit (3b).

The rear bolt on the engine coolant reservoir side also secures the earth lead.

Refitting ( Removing ) - Place the injection/ignition system control unit in its housing and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Injection/ignition system control unit	Bolt	M6	0.8 ÷ 1.0	1.8

- Connect the earth lead and secure it using the bolt.- Connect the electrical connections for the injection/ignition system control unit.