1080E50 INTERMEDIATE FUEL VAPOUR PIPE R R - Fiat - CROMA - eLearn

194000375 - 1080E50 INTERMEDIATE FUEL VAPOUR PIPE R R

) - Position the vehicle on a lift.1. Working underneath the vehicle, undo the bolts (1a) and remove the front pipe protection (1b).

1. Undo the bolts and remove the rear pipe protection.2. Undo the bolts (2a) and remove the bracket (2b).

1. Undo the bolts (1a), loosen the bolt (1b) and turn the underbody reinforcement (1c) sideways.

1. Disconnect the rapid connector for the intermediate fuel vapour pipe, front fuel vapour pipe side.

1. Disconnect the rapid connector for the intermediate fuel vapour pipe, rear fuel vapour pipe side.

1. Remove the intermediate fuel vapour pipe after having released it from the underbody fastenings.

Refitting ( Removing

) - Place the intermediate fuel vapour pipe in its housing and secure it to the underbody using the clips.- Connect the rapid connector for the intermediate fuel vapour pipe, rear fuel vapour pipe side.- Connect the rapid connector for the intermediate fuel vapour pipe, front fuel vapour pipe side.1. Place the underbody reinforcement (1a) in its housing and secure it tightening the new bolts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Inner bolt (to replace)	M12	(bodyshell side) 8.1 - 9.9 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Outer bolt (to replace)	M10	(bodyshell side) 5.0 - 6.1 + 45°

Component	Fastening	dia	Value (daNm)	Validity
Underbody reinforcements	Bolt (to be replaced)	M12	(front suspension frame side) 9.0 - 11.0 + 90°

- Fit the bracket in its housing and secure it using the bolts.- Place the rear pipe guard in its housing and secure it using the bolts.- Place the front pipe guard in its housing and secure it using the bolts.- Remove the vehicle from the lift.