194000383 - 1084A40 ENGINE OIL LEVEL SENSOR - R + R

Removing ( Refitting )     Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 1020A46 CRANKCASE OIL SUMP PARTITION - R.R. WITH CRANKCASE SUMP REMOVED1. Remove the retaining ring.2. Undo the bolts (2a) and remove the engine oil level sensor (2b). Refitting ( Removing ) - Place the engine oil level sensor in its housing and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine oil level sensor	-	M6 x 1	(engine oil sump side) 1.0	1.82.2

- Fasten the electrical connection for the engine oil level sensor using the safety clip.    Op. 1020A46 CRANKCASE OIL SUMP PARTITION - R.R. WITH CRANKCASE SUMP REMOVED    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1084A16 OIL DIPSTICK PIPE - R.R    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY