194000384 - 1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R

Removing ( Refitting )     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 1092G10 SINGLE ENGINE BELT - R.R- Undo the fastenings and move the air conditioning compressor to one side without disconnecting the pipes. Refer to    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY- Retract the protective casing for the engine oil pressure switch connector.1. Connect the electrical connection for the engine oil pressure switch.

	Description	Connector
1	Engine oil pressure sensor (switch)	See K030 LOW ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure switch. Refitting ( Removing ) - Place the engine oil pressure switch in position and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Switch for engine oil pressure warning light	-	-	2.0	1.8

- Connect the electrical connection for the engine oil pressure switch.- Place the protective casing for the engine oil pressure switch connector in position.- Place the air conditioning compressor in its housing and tighten it it using the fastenings. Refer to    Op. 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY    Op. 1092G10 SINGLE ENGINE BELT - R.R    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.