3380A30 HANDBRAKE CABLE - R+R - Fiat - CROMA - eLearn

194000519 - 3380A30 HANDBRAKE CABLE - R+R

) - Position the vehicle on a lift. Op. 1076B30 FRONT EXHAUST SILENCER - R + R Op. 1076B20 REAR EXHAUST SILENCER - R + R Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R Op. 4450B13 REAR WHEELS (TWO) - R.R Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.(Both). Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R. Op. 7040L28 TUNNEL SWITCH PANEL - R R Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R Op. 7040L20 TUNNEL COVER - R.R- Secure the handbrake lever self-adjustment system as follows.- Move the handbrake lever to rest position.1. Press the link spring to slacken tension in the cables.2. Apply sufficient force to lock the self-adjustment system and engage the retaining clip to the teeth.

1. Disconnect the handbrake control cable from the rear brake calipers.

1. Release the handbrake control cables from the intermediate fastenings.

1. Remove retaining ring (1a) and extract connection pin (1b).2. Remove the handbrake control cable assembly by disengaging from the fastenings on the body.

Refitting ( Removing

) - Refit the handbrake control cable assemblies in their seats and secure to the body.- Refit the connection pin in its seat and secure with a new retaining ring.- Secure the handbrake control cables to the intermediate fastenings.- Connect the handbrake control cable to the rear brake calipers.- Pull the handbrake control lever by hand to the end of its travel until the retaining clip is released.- Move the lever to rest position.- Then move the handbrake control lever to the end of its travel during the next four operations (maximum possible travel) to fully stabilise the self-adjustment system. Op. 7040L20 TUNNEL COVER - R.R Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R Op. 7040L28 TUNNEL SWITCH PANEL - R R Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R. Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.(Both). Op. 4450B13 REAR WHEELS (TWO) - R.R Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R Op. 1076B20 REAR EXHAUST SILENCER - R + R Op. 1076B30 FRONT EXHAUST SILENCER - R + R- Remove the vehicle from the lift.