194000600 - 5040A20 AIR CONDITIONING COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY

Removing ( Refitting ) - Position the vehicle on a lift.- Open the bonnet.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
-BATTERY    See A001 BATTERY
    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.Op.     Op. 1092G10 SINGLE ENGINE BELT - R.R1. Unscrew bolt (1a) securing air conditioner pipe (1b) to the compressor and release from anchorage clamp (1c).
1. Disconnect the compressor engagement electromagnet electrical connection.
DescriptionConnector
1AIR CONDITIONING COMPRESSOR ENGAGEMENT ELECTROMAGNET    See L020 AIR CONDITIONING COMPRESSOR ENGAGEMENT ELECTRO-MAGNET
2. Undo retaining bolts (2a) and remove air conditioner compressor (2b).
Refitting ( Removing )
Always replace the gaskets with new parts.
- Position the air conditioner pipe in its seat on the compressor.1. Unscrew bolt (1a) securing air conditioner pipe (1b) to the compressor, tighten to the specified torque and secure anchorage clamp (1c).
ComponentFasteningdia  Value (daNm)Validity
AIR CONDITIONING PIPE ON COMPRESSORBolt1.6 ÷ 2.41.8 16v
- Place the air conditioning compressor in position.- Tighten the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
AIR CONDITIONING COMPRESSORBolt2.25 ÷ 2.751.8 16v
Always replace the gaskets with new parts.
- Tighten the bolt securing the pipe to the compressor to the specified torque.
ComponentFasteningdia  Value (daNm)Validity
AIR CONDITIONING PIPE ON COMPRESSORBolt1.6 ÷ 2.41.8 16v
- Connect the electrical connection for the compressor engagement electromagnet.
DescriptionConnector
-AIR CONDITIONING COMPRESSOR ENGAGEMENT ELECTROMAGNET    See L020 AIR CONDITIONING COMPRESSOR ENGAGEMENT ELECTRO-MAGNET
    Op. 1092G10 SINGLE ENGINE BELT - R.ROp.     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND REPRESSURIZE- Connect the negative battery terminal.
DescriptionConnector
-BATTERY    See A001 BATTERY
- Remove the vehicle from the lift.