194000686 - 5505C26 BONNET WIRING - R.R.

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R1. Unscrew nuts (1a) and disconnect electrical connection (1b) from the battery positive terminal.

	Description	Connector
1b	MAXIFUSE BOX ON BATTERY	See B099 MAXIFUSE BOX ON BATTERY

1. Unscrew nuts (1a) and disconnect electrical connection (1b) from the battery negative terminal.

	Description	Connector
1b	BATTERY	See A001 BATTERY

1. Open protective cover (1a) of the MaxiFuse box by undoing the anchorage clip (1b). 1. Partly remove the MaxiFuse control unit from its housing.2. Disconnect the electrical connection.

	Description	Connector
2	ENGINE COMPARTMENT JUNCTION UNIT	See B001 ENGINE COMPARTMENT JUNCTION UNIT

3. Disconnect the electrical connection.

	Description	Connector
3	ENGINE COMPARTMENT JUNCTION UNIT	See B001 ENGINE COMPARTMENT JUNCTION UNIT

- Release the wiring from the retaining springs.1. Release the connection, operate safety lever (1a) and disconnect electrical connection (1b).

	Description	Connector
1b	FRONT/ENGINE COUPLING	See D004 FRONT/ENGINE COUPLING

1. Undo the fixing nut (1a) and disconnect the earth lead (1b).

	Description	Connector
1b	LEFT FRONT EARTH	See C010 LEFT FRONT EARTH

1. Disconnect the electrical connection from the radiator cooling fan.

	Description	Connector
1	ENGINE FAN MOTOR	See N011 ELECTRIC FAN MOTOR

1. Disconnect the electrical connection for the reversing light switch.

	Description	Connector
1	REVERSING LIGHTS SWITCH	See I020 REVERSING LIGHTS SWITCH

1. Operate safety lever (1a) and disconnect the electrical connection (1b).

	Description	Connector
1b	ENGINE MANAGEMENT CONTROL UNIT	See M010 ENGINE MANAGEMENT ECU

2. Operate safety lever (2a) and disconnect the electrical connection (2b).

	Description	Connector
2b	ENGINE CABLE/ENGINE SERVICE CABLE COUPLING	See D029 ENGINE CABLES/ENGINE SERVICES CABLE COUPLING

1. Undo the fixing nut (1a) and disconnect the earth lead (1b).

	Description	Connector
1b	EARTH ON ENGINE	See C040 EARTH ON ENGINE

1. Disconnect the electrical connections.

	Description	Connector
1	ELECTRICAL GUIDE CONTROL UNIT	See M086 ELECTRIC STEERING CONTROL UNIT

1. Undo the fixing nuts (1a) and disconnect the electrical connections (1b).

	Description	Connector
1b	ALTERNATOR	See A10 ALTERNATOR

1. Undo the fixing nut (1a) and disconnect the electrical connection (1b).

	Description	Connector
1b	STARTER MOTOR	See A20 STARTER MOTOR

- Remove the engine compartment wiring. Refitting ( Removing ) - Position the engine compartment wiring on the vehicle.- Connect the electrical connection and tighten the nut.

	Description	Connector
-	STARTER MOTOR	See A20 STARTER MOTOR

- Connect the electrical connections and tighten the nuts.

	Description	Connector
-	ALTERNATOR	See A10 ALTERNATOR

- Connect the electrical connections.

	Description	Connector
-	ELECTRICAL GUIDE CONTROL UNIT	See M086 ELECTRIC STEERING CONTROL UNIT

- Connect the earth lead and tighten the nut.

	Description	Connector
-	EARTH ON ENGINE	See C040 EARTH ON ENGINE

- Connect the electrical connection and secure it using the safety lever.

	Description	Connector
-	ENGINE MANAGEMENT CONTROL UNIT	See M010 ENGINE MANAGEMENT ECU

- Connect the electrical connection and secure it using the safety lever.

	Description	Connector
-	ENGINE CABLE/ENGINE SERVICE CABLE COUPLING	See D029 ENGINE CABLES/ENGINE SERVICES CABLE COUPLING

- Connect the electrical connection for the reversing light switch.

	Description	Connector
-	REVERSING LIGHTS SWITCH	See I020 REVERSING LIGHTS SWITCH

- Connect the electrical connection of the radiator cooling fan.

	Description	Connector
-	ENGINE FAN MOTOR	See N011 ELECTRIC FAN MOTOR

- Connect the earth lead and tighten the nut.

	Description	Connector
-	LEFT FRONT EARTH	See C010 LEFT FRONT EARTH

- Connect the electrical connection, secure with the safety lever and fasten to the safety clip.

	Description	Connector
-	FRONT/ENGINE COUPLING	See D004 FRONT/ENGINE COUPLING

- Secure the wiring to the anchorage clips.- Connect the electrical connection.

	Description	Connector
-	ENGINE COMPARTMENT JUNCTION UNIT	See B001 ENGINE COMPARTMENT JUNCTION UNIT

- Connect the electrical connection.

	Description	Connector
-	ENGINE COMPARTMENT JUNCTION UNIT	See B001 ENGINE COMPARTMENT JUNCTION UNIT

- Position the MaxiFuse box in its housing.- Fit the MaxiFuse box protective cover.- Connect the electrical connections to the battery negative terminal and tighten the nuts.

	Description	Connector
-	BATTERY	See A001 BATTERY

- Connect the electrical connections to the battery positive terminal and tighten the nuts.

	Description	Connector
-	MAXIFUSE BOX ON BATTERY	See B099 MAXIFUSE BOX ON BATTERY

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R