194000706 - 5520B10 STARTER MOTOR - R+R

Removing ( Refitting ) - Position the vehicle on the lift and raise it.- Open the bonnet.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
-BATTERY    See A001 BATTERY
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Undo the fixing bolts (1a) and remove the air chamber mounting bracket (1b).2. Disconnect and release the electrical connection.3. Undo the nut (3a) and disconnect the electrical connections (3b) from the starter motor.
DescriptionConnector
3bSTARTER MOTOR    See A20 STARTER MOTOR
1. Undo the nut (1a) and disconnect the electrical connection (1b) from the starter motor.
DescriptionConnector
1bSTARTER MOTOR    See A20 STARTER MOTOR
2. Undo the retaining bolts (2a) and remove starter motor (2b) from the vehicle.
Refitting ( Removing ) - Check that the starter motor is not damaged.- Place the starter motor in its housing and screw in the fixing bolts tightening them to the recommended torque.
DescriptionConnector
-STARTER MOTOR    See A20 STARTER MOTOR
- Connect the electrical connections to the starter motor and secure them using the nuts.
DescriptionConnector
-STARTER MOTOR    See A20 STARTER MOTOR
- Position the air intake chamber mounting bracket and tighten the bolts.- Close the protective cover for the starter motor electrical connection.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Connect the negative battery terminal.
DescriptionConnector
-BATTERY    See A001 BATTERY
Remove the vehicle from the lift.