194002054 - S088 SUN ROOF REAR BLIND NOISY

0	PRELIMINARY CHECKS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check whether the noise is located along the guide	Move on to Step 1	1. Sliding noise	1. Move on to Step 1.
			2. Winding noise	2. Move on to Step 4.
1	CHECK THE SLIDE PADS ARE CORRECTLY FASTENED	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the sun blind slide pads are in their seat.	Move on to Step 2	The pads are not in their seat.	Reposition the pads in their seat.
2	CHECK THE BLIND METAL REINFORCEMENTS	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check for deformations of the blind metal reinforcements.	Move on to Step 3	Deformations of the blind metal reinforcements found.	Replace the rear sunblind    Op. 7030B37 FIXED GLASS BLIND - R.R
3	CHECK FOR DEFORMATIONS IN THE FINISH TRIM	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check for deformations in the finish trim.	Move on to Step 4	Check for deformations in the finish trim.	Replace the finish trim    Op. 7030B51 SLIDING ROOF CENTRAL ANTI-WIND NOISE GASKET - R R
4	CHECK THE FREE MOVEMENT OF THE BLIND MOVEMENT DEVICES	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the free movement of the sliding blind cable guide device.	End of diagnosis	1. Binding detected due to external causes.	1. Remove foreign bodies/interference with elements near the drive device.
			2. Binding detected due to internal causes.	2. Replace the drive device    Op. 7030B39 SLIDING CURTAIN CABLE GUIDE DEVICE - R R