194002247 - 5570TC CHECK SUBWOOFER OPERATION

STEPCHECK TO BE PERFORMEDRESOLUTION IF THE CHECK IS NOT OK
1Check the direct power supplyCheck that a direct voltage of +12 is present at pin C8 of the subwoofer audio amplifierReplace the 30 Amp fuse F54 in the under-dashboard fuse control unit.
2Check the earthCheck that pin C1 is correctly earthedRestore the earth connection
3Check the ignition enablementCheck with the key on and Connect on that a 12 Volt signal is present at pin C2Restore the wiring across pin C2 of the amplifier and pin C6 of the radio
4Check status recognitionWith Connect on, check that a 12 Volt signal is present at pin C3.Restore the wiring across pin C3 of the amplifier and pin A2 of the radio
The following figure shows the subwoofer