| STEP | CHECK TO BE PERFORMED | RESOLUTION IF THE CHECK IS NOT OK |
|---|
| 1 | Check power supply (+15)- Connect using the Examiner in Voltmeter mode with the positive probe at pin 1 and the negative probe of the 5-way connector for the connector plate for the MPU earthed:
- Turn the key to the on position and read the battery voltage of around 12 volt
| Check the continuity of the 10 A fuse F51 in the dashboard junction unit and if broken replace it checking out the cause.Check the continuity of the wiring between the fuse and the MPU |
| 2 | Check earth connectionCheck the continuity of the connection between pin 2 of the two-way supply connector for the MPU connector plate and the earth | Restore the continuity of the earth connection |
| 3 | Check power supply (+30)Connect using the Examiner in Voltmeter mode with the positive probe at pin 1 and the negative probe of the two-way connector for the connector plate for the MPU earthed. | Check the continuity of the 80 A fuse F73 in the battery junction unit and if broken replace it checking out the cause. |
