194003022 - 1036C30 CAMSHAFT FRONT OIL SEAL IN CYLINDER HEAD - REPLACEMENT WITH TIMING BELT REMOVED

Removing ( Refitting )     Op. 1036C41 PHASE TRANSFORMER ON OVERHEAD CAMSHAFT (ONE) INTAKE EXHAUST ON CYLINDER HEAD - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1032C10 TIMING SYSTEM MOVING TENSIONER - R.R WITH TIMING BELT/CHAIN REMOVED    Op. 1032D31 PROTECTIVE TIMING INNER COVER - R.R. WITH TIMING BELT REMOVED1. Disconnect the electrical connections for the electromagnets.

	Description	Connector
1	Variable valve timing actuator	See N076 PHASE TRANSFORMER ACTUATOR

2. Unscrew the bolts and remove the camshaft front cap.3. Remove the two oil seals. - Remove the residues of sealant from the matching surfaces of the camshaft front cap - cylinder head. Refitting ( Removing ) - Fit two new oil seals on the camshafts after having lubricated them with engine oil.- Apply a bead of silicon sealant to the matching surfaces of the camshaft cap.- Place the camshaft cap in position using the two centering bushes and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Camshaft caps	Bolt	-	0.8	1.8

    Op. 1032D31 PROTECTIVE TIMING INNER COVER - R.R. WITH TIMING BELT REMOVED    Op. 1032C10 TIMING SYSTEM MOVING TENSIONER - R.R WITH TIMING BELT/CHAIN REMOVED    Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.    Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE    Op. 1036C41 PHASE TRANSFORMER ON OVERHEAD CAMSHAFT (ONE) INTAKE EXHAUST ON CYLINDER HEAD - R.R.