1088E10 RADIATOR COOLING FAN - R + R - Fiat - CROMA - eLearn

194003042 - 1088E10 RADIATOR COOLING FAN - R + R

) 1. Disconnect the resistor electrical connection.

	Description	Connector
1	Engine fan adjustment resistance - 1	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

2. Undo the upper bolts securing the fan to the radiator.

- Open the retaining clips and move the system water supply pipe to one side.1. Lift up the fan from the lower fastenings and remove it.

1. Disconnect the electrical connection for the fan motor.

	Description	Connector
1	Engine fan motor -1	See N011 ENGINE FAN MOTOR - 1

2. Undo the bolts and remove the fan from the duct.

1. If necessary, undo the bolt and remove the resistor.

Refitting ( Removing

) - Place the fan in its housing on the duct and tighten the bolts.- Connect the electrical connection for the fan motor.- Refit the radiator fan in its seat complete with duct and secure it to the radiator using the bolts.- Place the system water supply pipe in position and close the retaining clips on the duct.- Connect the resistor electrical connection.