198000226 - 1016B12 SINGLE CAMSHAFT HOUSING - R.R. WITH TIMING BELT REMOVED - REPLACE GASKET
Removing
(
Refitting
)
Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 1072B50 AIR CHAMBER - R.R.
1. Unscrew the bolt (1a) securing the cable loom retaining duct and open the band (1b).2. Detach the timing sensor electrical connection.3. Disconnect the electrical connections for the ignition coils and move the wiring to one side.4. Undo the bolts and remove the ignition coils.5. Unscrew the bolt and remove the timing sensor.6. Move the ignition coil wiring aside.7. Unscrew the bolt and move the oil dipstick.
1. Undo the protective caps (1a) and undo the bolts (1b) securing the camshaft housing using the tool (1c).| Tool | Description | Function | Validity |
|---|
| 1860834000 | Spanner | Loosen/tighten the cylinder head extension bolts | 1.4 16v |
2. Gently lift the camshaft housing and insert the tool.| Tool | Description | Function | Validity |
|---|
| 1860988000 | Tappet retaining tool | Tappet retaining | 1.4 16v |
- Remove the single camshaft housing and gasket.
Refitting
(
Removing
)
- Fit a new camshaft housing gasket in position.- Place the single camshaft housing in position.- Remove the tappet retaining tool.| Tool | Description | Function | Validity |
|---|
| 1860988000 | Tappet retaining tool | Tappet retaining | 1.4 16v |
- Tighten the single camshaft housing fixing bolts to the recommended torque using the tool.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Camshaft housing | Bolt | M8 | 1.3 ÷ 1.6 | 1.4 16v |
| Tool | Description | Function | Validity |
|---|
| 1860834000 | Spanner | Loosen/tighten the cylinder head extension bolts | 1.4 16v |
- Tighten the protective caps complete with new O-rings to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Engine cylinder head extension plugs | Plugs | M16 | 1.3 ÷ 1.6 | 1.4 16v |
- Position the oil dipstick and tighten the bolt.- Refit the ignition coil wiring in its seat.- Fit the timing sensor and tighten the bolt.- Place the ignition coils in their housings and secure them tightening the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|
| Ignition coils | Bolt | M6 | 0.9 | 1.4 16v |
- Connect the electrical connections for the ignition coils and place the wiring in position.- Secure the electrical connection for the timing sensor.- Tighten the bolt securing the cable loom retaining duct and close the band. Op. 1072B50 AIR CHAMBER - R.R. Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R
