198002375 - 7010E50 REAR SIDE DOOR PILLAR TRIM (ONE) LEFT OR RIGHT - R.R.

Removing ( Refitting )     Op. 7010D26 REAR SIDE DESCENDING WINDOW GLASS SCRAPER (OUTER) (ONE), LEFT OR RIGHT - R.R 1. Remove channel (1a) in the area of the pillar cover.2. Release the seal retaining stud using the special tool.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
3. Prise up window sliding seal (3a), in the area of pillar cover (3b)Take care not to damage electric window pad (3c).
1. Loosen bolts (1a) securing pillar cover (3b).
1. Remove the external pillar trim by sliding it upwards.
Refitting ( Removing ) - Check that the pillar trim is not damaged.- Fit the pillar trim in place.- Tighten the bolts securing the pillar trim.- Prise in the window sliding seal in the area of the pillar cover.
If necessary, use soapy water to facilitate the insertion of the window sliding channel into the housing.
- Engage the stud securing the channel.- Fit the channel in the area of the pillar trim.    Op. 7010D26 REAR SIDE DESCENDING WINDOW GLASS SCRAPER (OUTER) (ONE), LEFT OR RIGHT - R.R - Check that the electric window is working properly.