198000080 - 1008C32 GEARBOX LOWER REACTION ROD -R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Position a hydraulic support under the power unit, gearbox side.1. Undo the bolt securing the reaction rod to the suspension crossmember.2. Undo the bolt fixing the reaction rod to the bracket on the gearbox.3. Remove the reaction rod.
Refitting
(
Removing
)
- Refit the reaction link in its seat and tighten the bolt fixing the bracket on the gearbox to the specified torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox lower reaction rod - bracket side on gearbox | Bolt | M12 | 6.8 ÷ 8.2 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox lower reaction rod - suspension crossmember side | Bolt | M12 | 12.2 ÷ 14.7 |