198000137 - 1088C40 THERMOSTAT- R + R

Removing ( Refitting )     Op. 0010T20 ENGINE COOLANT - CHANGE - Disconnect the negative battery terminal.1. Loosen bands and disconnect sleeves (1a) and (1b) from the thermostat.2. Disconnect the degassing pipe rapid connector.3. Detach the air temperature sensor electrical connection.

	Description	Connector
3	Engine coolant temperature sensor/sender unit	See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

4. Undo the bolts and remove the thermostat.- Remove the gasket. Refitting ( Removing ) - Place the thermostat in position and secure it tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Thermostat	Bolt	M6	0.9 ÷ 1.1	1.4 16v

- Attach the electrical connection for the water temperature sensor.- Connect the degassing pipe rapid connector.- Connect the hoses to the thermostat using the bands.- Connect the negative battery terminal (-).    Op. 0010T20 ENGINE COOLANT - CHANGE