2710A10 DRIVESHAFT WITH JOINTS (ONE), L/H OR R/H - R + R - Fiat - NUOVA BRAVO - eLearn

198000289 - 2710A10 DRIVESHAFT WITH JOINTS (ONE), L/H OR R/H - R + R

)

The left driveshaft is illustrated below, carry out the same operations for the right driveshaft.

Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 4450B02 LEFT FRONT WHEEL - R.R Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Remove the staking, fit the tool (1a) and undo the wheel hub fixing nut (1b).

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front drive shaft to wheel hub

1. Undo the nut (1a) and, using the tool (1b), disconnect the steering rod (1c) from the steering knuckle.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

2. Undo the bolts securing the shock absorber to the wheel strut.3. Undo the bolt (3a) fixing the ABS rpm sensor (3b) and move it aside.

- Retract the steering knuckle assembly towards the outside of the vehicle to disconnect it from the driveshaft.1. Disconnect the sliding joint (1a) from the differential (1b) and remove the driveshaft complete with joints.

Refitting ( Removing

) - Place the sliding joint complete with joints in position.- Position the ABS rpm sensor in its housing and secure it using the bolt.- Connect the shock absorber to the steering knuckle using new bolts tightened to the recommended torque.

To tighten to torque, position the torque wrench on the nut and not on the bolt.

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber to wheel strut	Bolt (to be replaced)	M10	6.7 ÷ 7.3	1.4 16v1.9 JTD 8v

- Connect the steering link to the steering strut and secure by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Tighten the new wheel hub securing nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut (to replace)	M24	6.6 ÷ 7.3 + 62° +/- 2°

1. Stake the nut.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R. Op. 4450B02 LEFT FRONT WHEEL - R.R Op. 0010T40 CHANGE MANUAL GEARBOX OIL