198002445 - 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R .

Removing ( Refitting )     Op. 7040H80 REAR PARCEL SHELF - R.R. - Lift up the rear seat cushion.1. Undo the bolt securing the end of the rear seat belt.2. Move the end of the rear seat belt.- Fold the rear seat backrest over.
1. Prise up seals (1a) on rear door housing (1b) and tailgate housing, in the area of the side cover.2. Remove panel (2a) from the backrest retainer striker.3. Undo the bolts securing the side cover.4. Release inner retainers (4a) for side cover (4b), using the special tool.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
5. Remove side cover (4b), releasing it from rear seat belt (5a).
Refitting ( Removing ) - Check that the side cover is not damaged.- Engage the side cover onto the rear seat belt, then place it in position.- Engage the inner retainers for the side cover.- Tighten the bolts securing the side cover.- Position the backrest retainer striker panel and engage the retainers.- Fit the seals for the rear door housing and tailgate housing.- Raise the rear seat backrest.1. Position the end of the rear seat belt.2. Tighten the bolt securing the end of the rear seat belt to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rear seat belt buckle branch Bolt M10 3.6 ÷ 4.4
- Lower the rear seat cushion.    Op. 7040H80 REAR PARCEL SHELF - R.R.