198003045 - 7005R90 ELECTRIC DOOR MIRROR CABLE LOOM - R.R OR REPLACE

Removing ( Refitting )     Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R.     Op. 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R     Op. 7005R35 DOOR MIRROR REFLECTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R36 DOOR MIRROR ADJUSTMENT MOTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R37 DOOR MIRROR COVER (ONE), LEFT OR RIGHT - R.R 1. Remove the sound insulation bearing.2. Release the cover.3. Release the cable duct seal.4. Undo the bolts (4a) and move the motor support (4b) slightly.5. For the right rear view mirror only. Rotate the outside temperature sensor (5a) through 180° in the direction of the arrow (5b), releasing it from the retainer (5c), then extract it from the housing.6. Remove the cable loom. Refitting ( Removing ) - Check that the cable loom is not damaged and that the individual conductors are correctly fastened to the connections.If necessary, carry out continuity tests.- Position the wiring harness.- For the right rear view mirror only. Fit and rotate the outside temperature sensor attaching it to the retainer.- Fit the motor support and tighten the bolts.- Attach the cable duct seal.- Attach the cover.- Position the sound insulation bearing.    Op. 7005R37 DOOR MIRROR COVER (ONE), LEFT OR RIGHT - R.R     Op. 7005R36 DOOR MIRROR ADJUSTMENT MOTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R35 DOOR MIRROR REFLECTOR (ONE), LEFT OR RIGHT - R.R     Op. 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R     Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R.