198003028 - 1036B10 OVERHEAD CAMSHAFT IN CYLINDER HEAD - R.R ON VEHICLE
Removing
(
Refitting
)
Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R. Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED Op. 1016A20 SINGLE TAPPET COVER - R.R. AND REPLACE GASKET Op. 3330D30 VACUUM UNIT - R+R
1. Undo bolts (1a) and remove camshaft journal lubrication pipe (1b).2. Undo bolts (2a) and remove camshaft caps (2b).3. Remove camshaft (3a) complete with oil sealing ring (3b).
Refitting
(
Removing
)
- Fit the camshaft in its housing in the cylinder head.- Place the camshaft caps in their housings.- Place the camshaft journal lubrication pipe in its housing.- Tighten the bolts fixing the camshaft caps to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Camshaft caps | Bolt | M7 | 1.3 ÷ 1.6 | 1.9 JTD |
| Tool | Description | Function | Validity |
|---|---|---|---|
| 1860824000 | Fitting tool | Fitting camshaft front oil sealing ring | 1.9 JTD |
