1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT - Fiat - NUOVA BRAVO - eLearn

198000263 - 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

) Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.1. Act on the bolt fixing the drive pulley and rotate the crankshaft until the timing references are aligned (cylinder 1 at T.D.C.).

1. Loosen the nut retaining the timing belt mobile tensioner.2. Remove the toothed timing belt.

Refitting ( Removing

) 1. Remove the engine oil pump fixing bolt.2. Fit the timing belt on the crankshaft gear.3. Fit the pin for the tool for positioning the engine at T.D.C.

Tool	Description	Function	Validity
1860905000	Template	Engine tuning	1.9 JTD

4. Rotate the crankshaft using small movements to allow the pulley locating dowel (4a) to enter the opening in the tool (4b).5. Lock the tool in position using a nut (5a) and service bolt (5b).

1. Rotate the toothed pulley until the timing references are aligned.2. Complete the fitting of the timing belt following the order illustrated.3. Adjusting the semi-automatic tensioning device (3a), place the tensioner pointer (3b) in the maximum tension position, then lock the fixing nut (3c).- Remove the tool for T.D.C.

Tool	Description	Function	Validity
1860905000	Template	Engine tuning	1.9 JTD

- Rotate the crankshaft through two revolutions in its normal direction of rotation.4. Loosen the nut fixing the tensioner and, working carefully, position the tensioner (4a) reference in line with the reference opening (4b), then tighten the nut (4c) fixing the belt tensioner to torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing system moving tensioner	Nut	M8	2.3 ÷ 2.8	1.9 JTD

Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R. Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R. Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 1092G10 SINGLE ENGINE BELT - R.R Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 1016A10 SOUND-PROOFING COVER - R.R