198000022 - 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

- Check that the brake fluid in the reservoir is at the maximum level; if this is not the case, top up using the recommended fluid.- When topping up the brake fluid, remove the reservoir cap and top up using the recommended fluid until the maximum level is reached.
ComponentTypeDescriptionClassificationQty.Validity
BRAKE-CLUTCH HYDRAULIC SYSTEMFluid [kg]TUTELA TOP 4FMVSS n° 116 DOT 4, ISO 4925 SAE J1704 - CUNA NC 956-010.525
The fluid in the reservoir should not exceed the MAX notch.
The symbol on the tank identifies synthetic type brake fluids, distinguishing them from mineral type fluids. Using mineral type fluids irreparably damages the special braking system rubber seals.
Take great care to prevent the brake fluid, which is extremely corrosive, from coming into contact with the paintwork. If this does happen, wash immediately with hot water.
Brake fluid is poisonous and highly corrosive. In the event of accidental contact, immediately wash the affected parts with water and neutral soap, then rinse thoroughly. Consult a doctor immediate if you swallow the fluid.