198000052 - 3340A30 RPM SENSOR (ONE) FOR ONE FRONT WHEEL, LEFT OR RIGHT - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.1. Disconnect the electrical connection for the left front wheel rpm sensor and release the wiring from the retaining clips in the engine compartment.

	Description	Connector
1	Left front wheel sensor for ABS	See K070 LEFT FRONT WHEEL SENSOR FOR ABS

1. Raise the vehicle and undo the bolt fixing the rpm sensor to the steering knuckle.2. Release the wiring from the intermediate retaining brackets and remove the rpm sensor. Refitting ( Removing ) - Position the rpm sensor in its housing and tighten the bolt securing it to the steering knuckle to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel rpm sensor	Bolt	M6	0.5 ÷ 0.8

- Secure the wiring using the intermediate retaining brackets.- Lower the vehicle, connect the electrical connection for the rpm sensor and secure the wiring using the retaining clips in the engine compartment.- Remove the vehicle from the lift.