198000056 - 3340B55 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO LEFT FRONT BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.

Mark the position of the rigid pipes before unscrewing the connectors.

1. Undo the connectors for the rigid pipes on the ABS control unit.- Undo the clips securing the rigid pipe to the body . 1. Undo connector (1a) and remove rigid pipe (1b). Refitting ( Removing ) - Position the rigid pipe and connect it to the left front brake calliper hose, tightening the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Do up the clips securing the rigid pipe to the body.- Tighten the connectors securing the rigid pipes to the ABS control unit to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipes from hydraulic control unit to left front/rear brakes - control unit side	Connector	M10	1.4 ÷ 1.8

    Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.