198000059 - 3340B69 RIGID PIPE FROM CONNECTOR TO LEFT REAR BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .    Op. 1076B30 FRONT EXHAUST SILENCER - R + R - Remove the under body protection on the left hand side, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R- Unscrew the brake/clutch fluid reservoir plug and fit the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/ clutch system vacuum

1. Undo the clips securing the rigid pipe to the body.2. Unscrew connectors (2a) and (2b), open clip (2c) and remove rigid pipe (2d). Refitting ( Removing ) - Place the rigid pipe in position, do up the clip and tighten the connectors to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10	1.4 ÷ 1.8

- Close the clips securing the rigid pipe to the body.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 1076A51 HEAT SHIELD FOR EXHAUST PIPE ON FUEL TANK - R.R- Place the under body protection on the left hand side in position, refer to    Op. 7055B80 UNDERBODY SIDE PROTECTION (ONE) LEFT OR RIGHT - R.R.    Op. 1076B30 FRONT EXHAUST SILENCER - R + R     Op. 7055B81 ANY (ONE) UNDERBODY PROTECTION FOR BRAKING/FUEL SYSTEM - R.R .- Remove the vehicle from the lift.