198000133 - 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.
Removing ( Refitting ) Op. 0010T20 ENGINE COOLANT - CHANGE 1. Disconnect the rapid connector from the fuel return pipe, fuel filter side, open the retaining clip and move it to one side.2. Loosen the band and disconnect the degassing pipe from the thermostat.3. Undo the bolts fixing the reservoir to the body.4. Release the reservoir from the flexible mounting as necessary to loosen the band and disconnect the system supply pipe.5. Remove the reservoir.
Refitting
(
Removing
)
- Connect the system supply pipe to the reservoir and tighten the band.- Fit the reservoir in its housing and secure it using the bolts.- Connect the degassing pipe to the reservoir and tighten the band.- Refit the fuel return pipe, connect it to the fuel filter using the rapid connector and close the retaining clip. Op. 0010T20 ENGINE COOLANT - CHANGE